Jump to content

Rutherfordium

Edit links
This is a good article. Click here for more information.
From Wikipedia, the free encyclopedia
(Redirected from Eka-Hafnium)
Not to be confused with Ruthenium.
Rutherfordium, 104Rf
Rutherfordium
Pronunciation/ˌrʌðərˈfɔːrdiəm/ ⓘ ​(RUDH-ər-FOR-dee-əm)
Mass number[267]
Rutherfordium in the periodic table
Hydrogen Helium
Lithium Beryllium Boron Carbon Nitrogen Oxygen Fluorine Neon
Sodium Magnesium Aluminium Silicon Phosphorus Sulfur Chlorine Argon
Potassium Calcium Scandium Titanium Vanadium Chromium Manganese Iron Cobalt Nickel Copper Zinc Gallium Germanium Arsenic Selenium Bromine Krypton
Rubidium Strontium Yttrium Zirconium Niobium Molybdenum Technetium Ruthenium Rhodium Palladium Silver Cadmium Indium Tin Antimony Tellurium Iodine Xenon
Caesium Barium Lanthanum Cerium Praseodymium Neodymium Promethium Samarium Europium Gadolinium Terbium Dysprosium Holmium Erbium Thulium Ytterbium Lutetium Hafnium Tantalum Tungsten Rhenium Osmium Iridium Platinum Gold Mercury (element) Thallium Lead Bismuth Polonium Astatine Radon
Francium Radium Actinium Thorium Protactinium Uranium Neptunium Plutonium Americium Curium Berkelium Californium Einsteinium Fermium Mendelevium Nobelium Lawrencium Rutherfordium Dubnium Seaborgium Bohrium Hassium Meitnerium Darmstadtium Roentgenium Copernicium Nihonium Flerovium Moscovium Livermorium Tennessine Oganesson
Hf
↑
Rf
↓
—
lawrencium ← rutherfordium → dubnium
Atomic number (Z)104
Groupgroup 4
Periodperiod 7
Block  d-block
Electron configuration[Rn] 5f14 6d2 7s2[1][2]
Electrons per shell2, 8, 18, 32, 32, 10, 2
Physical properties
Phase at STPsolid (predicted)[1][2]
Melting point2400 K ​(2100 °C, ​3800 °F) (predicted)[1][2]
Boiling point5800 K ​(5500 °C, ​9900 °F) (predicted)[1][2]
Density (near r.t.)17 g/cm3 (predicted)[3][4]
Atomic properties
Oxidation statescommon: +4
(+3), (+4)[2]
Ionization energies
  • 1st: 580 kJ/mol
  • 2nd: 1390 kJ/mol
  • 3rd: 2300 kJ/mol
  • (more) (all but first estimated)[2]
Atomic radiusempirical: 150 pm (estimated)[2]
Covalent radius157 pm (estimated)[1]
Other properties
Natural occurrencesynthetic
Crystal structure ​hexagonal close-packed (hcp)
Hexagonal close-packed crystal structure for rutherfordium

(predicted)[5]
CAS Number53850-36-5
History
Namingafter Ernest Rutherford
DiscoveryJoint Institute for Nuclear Research and Lawrence Berkeley National Laboratory (1969)
Isotopes of rutherfordium
Main isotopes[6] Decay
abun­dance half-life (t1/2) mode pro­duct
261Rf synth 2.1 s SF82% –
α18% 257No
263Rf synth 15 min[7] SF<100%? –
α~30%? 259No
265Rf synth 1.1 min[8] SF –
267Rf synth 48 min[9] SF –
 Category: Rutherfordium
| references

Rutherfordium is a synthetic chemical element; it has symbol Rf and atomic number 104. It is named after physicist Ernest Rutherford. As a synthetic element, it is not found in nature and can only be made in a particle accelerator. It is radioactive; the most stable known isotope, 267Rf, has a half-life of about 48 minutes.

In the periodic table, it is a d-block element and the second of the fourth-row transition elements. It is in period 7 and is a group 4 element. Chemistry experiments have confirmed that rutherfordium behaves as the heavier homolog to hafnium in group 4. The chemical properties of rutherfordium are characterized only partly. They compare well with the other group 4 elements, even though some calculations had indicated that the element might show significantly different properties due to relativistic effects.

In the 1960s, small amounts of rutherfordium were produced at Joint Institute for Nuclear Research in the Soviet Union and at Lawrence Berkeley National Laboratory in California.[10] Priority of discovery and hence the name of the element was disputed between Soviet and American scientists, and it was not until 1997 that the International Union of Pure and Applied Chemistry (IUPAC) established rutherfordium as the official name of the element.

Introduction

[edit]
This section is an excerpt from Superheavy element § Introduction.[edit]

Synthesis of superheavy nuclei

[edit]
A graphic depiction of a nuclear fusion reaction
A graphic depiction of a nuclear fusion reaction. Two nuclei fuse into one, emitting a neutron. Reactions that created new elements to this moment were similar, with the only possible difference that several singular neutrons sometimes were released, or none at all.

A superheavy[a] atomic nucleus is created in a nuclear reaction that combines two other nuclei of unequal size[b] into one; roughly, the more unequal the two nuclei in terms of mass, the greater the possibility that the two react.[16] The material made of the heavier nuclei is made into a target, which is then bombarded by the beam of lighter nuclei. Two nuclei can only fuse into one if they approach each other closely enough; normally, nuclei (all positively charged) repel each other due to electrostatic repulsion. The strong interaction can overcome this repulsion but only within a very short distance from a nucleus; beam nuclei are thus greatly accelerated in order to make such repulsion insignificant compared to the velocity of the beam nucleus.[17] The energy applied to the beam nuclei to accelerate them can cause them to reach speeds as high as one-tenth of the speed of light. However, if too much energy is applied, the beam nucleus can fall apart.[17]

Coming close enough alone is not enough for two nuclei to fuse: when two nuclei approach each other, they usually remain together for about 10−20 seconds and then part ways (not necessarily in the same composition as before the reaction) rather than form a single nucleus.[17][18] This happens because during the attempted formation of a single nucleus, electrostatic repulsion tears apart the nucleus that is being formed.[17] Each pair of a target and a beam is characterized by its cross section—the probability that fusion will occur if two nuclei approach one another expressed in terms of the transverse area that the incident particle must hit in order for the fusion to occur.[c] This fusion may occur as a result of the quantum effect in which nuclei can tunnel through electrostatic repulsion. If the two nuclei can stay close past that phase, multiple nuclear interactions result in redistribution of energy and an energy equilibrium.[17]

External videos
video icon Visualization of unsuccessful nuclear fusion, based on calculations from the Australian National University[20]

The resulting merger is an excited state[21]—termed a compound nucleus—and thus it is very unstable.[17] To reach a more stable state, the temporary merger may fission without formation of a more stable nucleus.[22] Alternatively, the compound nucleus may eject a few neutrons, which would carry away the excitation energy; if the latter is not sufficient for a neutron expulsion, the merger would produce a gamma ray. This happens in about 10−16 seconds after the initial nuclear collision and results in creation of a more stable nucleus.[22] The definition by the IUPAC/IUPAP Joint Working Party (JWP) states that a chemical element can only be recognized as discovered if a nucleus of it has not decayed within 10−14 seconds. This value was chosen as an estimate of how long it takes a nucleus to acquire electrons and thus display its chemical properties.[23][d]

Decay and detection

[edit]

The beam passes through the target and reaches the next chamber, the separator; if a new nucleus is produced, it is carried with this beam.[25] In the separator, the newly produced nucleus is separated from other nuclides (that of the original beam and any other reaction products)[e] and transferred to a surface-barrier detector, which stops the nucleus. The exact location of the upcoming impact on the detector is marked; also marked are its energy and the time of the arrival.[25] The transfer takes about 10−6 seconds; in order to be detected, the nucleus must survive this long.[28] The nucleus is recorded again once its decay is registered, and the location, the energy, and the time of the decay are measured.[25]

Stability of a nucleus is provided by the strong interaction. However, its range is very short; as nuclei become larger, its influence on the outermost nucleons (protons and neutrons) weakens. At the same time, the nucleus is torn apart by electrostatic repulsion between protons, and its range is not limited.[29] Total binding energy provided by the strong interaction increases linearly with the number of nucleons, whereas electrostatic repulsion increases with the square of the atomic number, i.e. the latter grows faster and becomes increasingly important for heavy and superheavy nuclei.[30][31] Superheavy nuclei are thus theoretically predicted[32] and have so far been observed[33] to predominantly decay via decay modes that are caused by such repulsion: alpha decay and spontaneous fission.[f] Almost all alpha emitters have over 210 nucleons,[35] and the lightest nuclide primarily undergoing spontaneous fission has 238.[36] In both decay modes, nuclei are inhibited from decaying by corresponding energy barriers for each mode, but they can be tunneled through.[30][31]

Apparatus for creation of superheavy elements
Scheme of an apparatus for creation of superheavy elements, based on the Dubna Gas-Filled Recoil Separator set up in the Flerov Laboratory of Nuclear Reactions in JINR. The trajectory within the detector and the beam focusing apparatus changes because of a dipole magnet in the former and quadrupole magnets in the latter.[37]

Alpha particles are commonly produced in radioactive decays because the mass of an alpha particle per nucleon is small enough to leave some energy for the alpha particle to be used as kinetic energy to leave the nucleus.[38] Spontaneous fission is caused by electrostatic repulsion tearing the nucleus apart and produces various nuclei in different instances of identical nuclei fissioning.[31] As the atomic number increases, spontaneous fission rapidly becomes more important: spontaneous fission partial half-lives decrease by 23 orders of magnitude from uranium (element 92) to nobelium (element 102),[39] and by 30 orders of magnitude from thorium (element 90) to fermium (element 100).[40] The earlier liquid drop model thus suggested that spontaneous fission would occur nearly instantly due to disappearance of the fission barrier for nuclei with about 280 nucleons.[31][41] The later nuclear shell model suggested that nuclei with about 300 nucleons would form an island of stability in which nuclei will be more resistant to spontaneous fission and will primarily undergo alpha decay with longer half-lives.[31][41] Subsequent discoveries suggested that the predicted island might be further than originally anticipated; they also showed that nuclei intermediate between the long-lived actinides and the predicted island are deformed, and gain additional stability from shell effects.[42] Experiments on lighter superheavy nuclei,[43] as well as those closer to the expected island,[39] have shown greater than previously anticipated stability against spontaneous fission, showing the importance of shell effects on nuclei.[g]

Alpha decays are registered by the emitted alpha particles, and the decay products are easy to determine before the actual decay; if such a decay or a series of consecutive decays produces a known nucleus, the original product of a reaction can be easily determined.[h] (That all decays within a decay chain were indeed related to each other is established by the location of these decays, which must be in the same place.)[25] The known nucleus can be recognized by the specific characteristics of decay it undergoes such as decay energy (or more specifically, the kinetic energy of the emitted particle).[i] Spontaneous fission, however, produces various nuclei as products, so the original nuclide cannot be determined from its daughters.[j]

The information available to physicists aiming to synthesize a superheavy element is thus the information collected at the detectors: location, energy, and time of arrival of a particle to the detector, and those of its decay. The physicists analyze this data and seek to conclude that it was indeed caused by a new element and could not have been caused by a different nuclide than the one claimed. Often, provided data is insufficient for a conclusion that a new element was definitely created and there is no other explanation for the observed effects; errors in interpreting data have been made.[k]

History

[edit]

Discovery

[edit]

Rutherfordium was reportedly first detected in 1964 at the Joint Institute for Nuclear Research at Dubna (Soviet Union at the time). Researchers there bombarded a plutonium-242 target with neon-22 ions; a spontaneous fission activity with half-life 0.3 ± 0.1 seconds was detected and assigned to 260104. Later work found no isotope of element 104 with this half-life, so that this assignment must be considered incorrect.[54]

In 1966–1969, the experiment was repeated. This time, the reaction products by gradient thermochromatography after conversion to chlorides by interaction with ZrCl4. The team identified spontaneous fission activity contained within a volatile chloride portraying eka-hafnium properties.[54]

242
94Pu
 + 22
10Ne
 → 264−x
104Rf
 → 264−x
104Rf
Cl4

The researchers considered the results to support the 0.3 second half-life. Although it is now known that there is no isotope of element 104 with such a half-life, the chemistry does fit that of element 104, as chloride volatility is much greater in group 4 than in group 3 (or the actinides).[54]

In 1969, researchers at University of California, Berkeley conclusively synthesized the element by bombarding a californium-249 target with carbon-12 ions and measured the alpha decay of 257Rf, correlated with the daughter decay of nobelium-253:[55]

249
98Cf
 + 12
6C
 → 257
104Rf
 + 4
n

They were unable to confirm the 0.3-second half-life for 260104, and instead found a 10–30 millisecond half-life for this isotope, agreeing with the modern value of 21 milliseconds. In 1970, the American team chemically identified element 104 using the ion-exchange separation method, proving it to be a group 4 element and the heavier homologue of hafnium.[56]

The American synthesis was independently confirmed in 1973 and secured the identification of rutherfordium as the parent by the observation of K-alpha X-rays in the elemental signature of the 257Rf decay product, nobelium-253.[57]

Naming controversy

[edit]
Main article: Transfermium Wars
Element 104 was eventually named after Ernest Rutherford
Igor Kurchatov

As a consequence of the initial competing claims of discovery, an element naming controversy arose. Since the Soviets claimed to have first detected the new element they suggested the name kurchatovium (Ku) in honor of Igor Kurchatov (1903–1960), former head of Soviet nuclear research. This name had been used in books of the Soviet Bloc as the official name of the element. The Americans, however, proposed rutherfordium (Rf) for the new element to honor New Zealand physicist Ernest Rutherford, who is known as the "father" of nuclear physics.[58] In 1992, the IUPAC/IUPAP Transfermium Working Group (TWG) assessed the claims of discovery and concluded that both teams provided contemporaneous evidence to the synthesis of element 104 in 1969, and that credit should be shared between the two groups. In particular, this involved the TWG performing a new retrospective reanalysis of the Russian work in the face of the later-discovered fact that there is no 0.3-second isotope of element 104: they reinterpreted the Dubna results as having been caused by a spontaneous fission branch of 259Rf.[54]

The American group wrote a scathing response to the findings of the TWG, stating that they had given too much emphasis on the results from the Dubna group. In particular they pointed out that the Russian group had altered the details of their claims several times over a period of 20 years, a fact that the Russian team does not deny. They also stressed that the TWG had given too much credence to the chemistry experiments performed by the Russians, considered the TWG's retrospective treatment of the Russian work based on unpublished documents to have been "highly irregular", noted that there was no proof that 259Rf had a spontaneous fission branch at all[56] (as of 2021 there still is not),[59] and accused the TWG of not having appropriately qualified personnel on the committee. The TWG responded by saying that this was not the case and having assessed each point raised by the American group said that they found no reason to alter their conclusion regarding priority of discovery.[56]

The International Union of Pure and Applied Chemistry (IUPAC) adopted unnilquadium (Unq) as a temporary, systematic element name, derived from the Latin names for digits 1, 0, and 4. In 1994, IUPAC suggested a set of names for elements 104 through 109, in which dubnium (Db) became element 104 and rutherfordium became element 106.[60] This recommendation was criticized by the American scientists for several reasons. Firstly, their suggestions were scrambled: the names rutherfordium and hahnium, originally suggested by Berkeley for elements 104 and 105, were respectively reassigned to elements 106 and 108. Secondly, elements 104 and 105 were given names favored by JINR, despite earlier recognition of LBL as an equal co-discoverer for both of them. Thirdly and most importantly, IUPAC rejected the name seaborgium for element 106, having just approved a rule that an element could not be named after a living person, even though the IUPAC had given the LBNL team the sole credit for its discovery.[61] In 1997, IUPAC renamed elements 104 to 109, and gave elements 104 and 106 the Berkeley proposals rutherfordium and seaborgium. The name dubnium was given to element 105 at the same time. The 1997 names were accepted by researchers and became the standard.[62]

Isotopes

[edit]
List of rutherfordium isotopes
Isotope Half-life[l] Decay
mode 		Discovery
year 		Discovery
reaction
Value ref
253Rf 13 ms [6] SF 1997 204Pb(50Ti,n)[63]
253mRf 52 μs [6] SF 1995 204Pb(50Ti,n)[63]
254Rf 22.9 μs [6] SF 1997 206Pb(50Ti,2n)[63]
254m1Rf 4.3 μs [6] IT 2015
254m2Rf 247 μs [6] IT 2015
255Rf 1.63 s [6] α, SF 1975 207Pb(50Ti,2n)[64]
255m1Rf 43 μs [6] IT 2015
255m2Rf 16 μs [6] IT 2020
255m3Rf 41 μs [6] IT 2020
256Rf 6.60 ms [6] SF, α 1975 208Pb(50Ti,2n)[64]
256m1Rf 25 μs [6] IT 2009
256m2Rf 17 μs [6] IT 2009
256m3Rf 27 μs [6] IT 2009
257Rf 5.0 s [6] α, β+, SF 1969 249Cf(12C,4n)[55]
257m1Rf 4.5 s [6] α, β+ 1997 249Cf(12C,4n)[63]
257m2Rf 106 μs [6] IT 2009
258Rf 12.5 ms [6] SF, α 1969 249Cf(13C,4n)[55]
258m1Rf 3.4 ms [6] IT 2016 258Db(
e−
,
ν
e)[65]
258m2Rf 15 μs [6] 2016 258Db(
e−
,
ν
e)[65]
259Rf 2.63 s [6] α, β+ 1969 249Cf(13C,3n)[55]
260Rf 21 ms [6] SF 1985 248Cm(16O,4n)[54]
261Rf 2.1 s [6] SF, α 1970 244Pu(22Ne,5n)[66]
261mRf 74 s [6] α 1970 248Cm(18O,5n)[67]
262Rf 250 ms [6] SF 1985 244Pu(22Ne,4n)[68]
262mRf 47 ms [6] SF 1978 244Pu(22Ne,4n),
248Cm(18Ne,4n)[69]
263Rf 11 min [6] SF 2003 263Db(
e−
,
ν
e)[70]
263mRf 8 s [71] SF 2008 263Db(
e−
,
ν
e)
265Rf 1.1 min [8] SF 2010 269Sg(—,α)[72]
266Rf 23 s? [73] SF 2007? 266Db(
e−
,
ν
e)?[74][75]
267Rf 48 min [76] SF 2004 271Sg(—,α)[77]
268Rf 1.4 s? [73] SF 2004? 268Db(
e−
,
ν
e)?[75][78]
270Rf 20 ms? [73] SF 2010? 270Db(
e−
,
ν
e)?[79]
Main article: Isotopes of rutherfordium

Rutherfordium has no stable or naturally occurring isotopes. Several radioactive isotopes have been synthesized in the laboratory, either by fusing two atoms or by observing the decay of heavier elements. Sixteen different isotopes have been reported with atomic masses from 253 to 270 (with the exceptions of 264 and 269). Most of these decay predominantly through spontaneous fission pathways.[7][80]

Stability and half-lives

[edit]

Out of isotopes whose half-lives are known, the lighter isotopes usually have shorter half-lives; half-lives of under 50 μs for 253Rf and 254Rf were observed. 256Rf, 258Rf, 260Rf are more stable at around 10 ms, 255Rf, 257Rf, 259Rf, and 262Rf live between 1 and 5 seconds, and 261Rf, 265Rf, and 263Rf are more stable, at around 1.1, 1.5, and 10 minutes respectively. The heaviest isotopes are the most stable, with 267Rf having a measured half-life of about 48 minutes.[76]

The lightest isotopes were synthesized by direct fusion between two lighter nuclei and as decay products. The heaviest isotope produced by direct fusion is 262Rf; heavier isotopes have only been observed as decay products of elements with larger atomic numbers. The heavy isotopes 266Rf and 268Rf have also been reported as electron capture daughters of the dubnium isotopes 266Db and 268Db, but have short half-lives to spontaneous fission. It seems likely that the same is true for 270Rf, a possible daughter of 270Db.[79] These three isotopes remain unconfirmed.

In 1999, American scientists at the University of California, Berkeley, announced that they had succeeded in synthesizing three atoms of 293Og.[81] These parent nuclei were reported to have successively emitted seven alpha particles to form 265Rf nuclei, but their claim was retracted in 2001.[82] This isotope was later discovered in 2010 as the final product in the decay chain of 285Fl.[8][72]

Predicted properties

[edit]

Very few properties of rutherfordium or its compounds have been measured; this is due to its extremely limited and expensive production[83] and the fact that rutherfordium (and its parents) decays very quickly. A few singular chemistry-related properties have been measured, but properties of rutherfordium metal remain unknown and only predictions are available.

Chemical

[edit]

Rutherfordium is the first transactinide element and the second member of the 6d series of transition metals. Calculations on its ionization potentials, atomic radius, as well as radii, orbital energies, and ground levels of its ionized states are similar to that of hafnium and very different from that of lead. Therefore, it was concluded that rutherfordium's basic properties will resemble those of other group 4 elements, below titanium, zirconium, and hafnium.[70][84] Some of its properties were determined by gas-phase experiments and aqueous chemistry. The oxidation state +4 is the only stable state for the latter two elements and therefore rutherfordium should also exhibit a stable +4 state.[84] In addition, rutherfordium is also expected to be able to form a less stable +3 state.[2] The standard reduction potential of the Rf4+/Rf couple is predicted to be higher than −1.7 V.[85]

Initial predictions of the chemical properties of rutherfordium were based on calculations which indicated that the relativistic effects on the electron shell might be strong enough that the 7p orbitals would have a lower energy level than the 6d orbitals, giving it a valence electron configuration of 6d1 7s2 7p1 or even 7s2 7p2, therefore making the element behave more like lead than hafnium. With better calculation methods and experimental studies of the chemical properties of rutherfordium compounds it could be shown that this does not happen and that rutherfordium instead behaves like the rest of the group 4 elements.[2][84] Later it was shown in ab initio calculations with the high level of accuracy[86][87][88] that the Rf atom has the ground state with the 6d2 7s2 valence configuration and the low-lying excited 6d1 7s2 7p1 state with the excitation energy of only 0.3–0.5 eV.

In an analogous manner to zirconium and hafnium, rutherfordium is projected to form a very stable, refractory oxide, RfO2. It reacts with halogens to form tetrahalides, RfX4, which hydrolyze on contact with water to form oxyhalides RfOX2. The tetrahalides are volatile solids existing as monomeric tetrahedral molecules in the vapor phase.[84]

In the aqueous phase, the Rf4+ ion hydrolyzes less than titanium(IV) and to a similar extent as zirconium and hafnium, thus resulting in the RfO2+ ion. Treatment of the halides with halide ions promotes the formation of complex ions. The use of chloride and bromide ions produces the hexahalide complexes RfCl2−
6 and RfBr2−
6. For the fluoride complexes, zirconium and hafnium tend to form hepta- and octa- complexes. Thus, for the larger rutherfordium ion, the complexes RfF2−
6, RfF3−
7 and RfF4−
8 are possible.[84]

Physical and atomic

[edit]

Rutherfordium is expected to be a solid under normal conditions and have a hexagonal close-packed crystal structure (c/a = 1.61), similar to its lighter congener hafnium.[5] It should be a metal with density ~17 g/cm3.[3][4] The atomic radius of rutherfordium is expected to be ~150 pm. Due to relativistic stabilization of the 7s orbital and destabilization of the 6d orbital, Rf+ and Rf2+ ions are predicted to give up 6d electrons instead of 7s electrons, which is the opposite of the behavior of its lighter homologs.[2] When under high pressure (variously calculated as 72 or ~50 GPa), rutherfordium is expected to transition to body-centered cubic crystal structure; hafnium transforms to this structure at 71±1 GPa, but has an intermediate ω structure that it transforms to at 38±8 GPa that should be lacking for rutherfordium.[89]

Experimental chemistry

[edit]

Gas phase

[edit]
The tetrahedral structure of the RfCl4 molecule

Early work on the study of the chemistry of rutherfordium focused on gas thermochromatography and measurement of relative deposition temperature adsorption curves. The initial work was carried out at Dubna in an attempt to reaffirm their discovery of the element. Recent work is more reliable regarding the identification of the parent rutherfordium radioisotopes. The isotope 261mRf has been used for these studies,[84] though the long-lived isotope 267Rf (produced in the decay chain of 291Lv, 287Fl, and 283Cn) may be advantageous for future experiments.[90] The experiments relied on the expectation that rutherfordium would be a 6d element in group 4 and should therefore form a volatile molecular tetrachloride, that would be tetrahedral in shape.[84][91][92] Rutherfordium(IV) chloride is more volatile than its lighter homologue hafnium(IV) chloride (HfCl4) because its bonds are more covalent.[2]

A series of experiments confirmed that rutherfordium behaves as a typical member of group 4, forming a tetravalent chloride (RfCl4) and bromide (RfBr4) as well as an oxychloride (RfOCl2). A decreased volatility was observed for RfCl
4 when potassium chloride is provided as the solid phase instead of gas, highly indicative of the formation of nonvolatile K
2RfCl
6 mixed salt.[70][84][93]

Aqueous phase

[edit]

Rutherfordium is expected to have the electron configuration [Rn]5f14 6d2 7s2 and therefore behave as the heavier homologue of hafnium in group 4 of the periodic table. It should therefore readily form a hydrated Rf4+ ion in strong acid solution and should readily form complexes in hydrochloric acid, hydrobromic or hydrofluoric acid solutions.[84]

The most conclusive aqueous chemistry studies of rutherfordium have been performed by the Japanese team at Japan Atomic Energy Research Institute using the isotope 261mRf. Extraction experiments from hydrochloric acid solutions using isotopes of rutherfordium, hafnium, zirconium, as well as the pseudo-group 4 element thorium have proved a non-actinide behavior for rutherfordium. A comparison with its lighter homologues placed rutherfordium firmly in group 4 and indicated the formation of a hexachlororutherfordate complex in chloride solutions, in a manner similar to hafnium and zirconium.[84][94]

261m
Rf4+
 + 6 Cl−
 → [261mRfCl
6]2−

Very similar results were observed in hydrofluoric acid solutions. Differences in the extraction curves were interpreted as a weaker affinity for fluoride ion and the formation of the hexafluororutherfordate ion, whereas hafnium and zirconium ions complex seven or eight fluoride ions at the concentrations used:[84]

261m
Rf4+
 + 6 F−
 → [261mRfF
6]2−

Experiments performed in mixed sulfuric and nitric acid solutions shows that rutherfordium has a much weaker affinity towards forming sulfate complexes than hafnium. This result is in agreement with predictions, which expect rutherfordium complexes to be less stable than those of zirconium and hafnium because of a smaller ionic contribution to the bonding. This arises because rutherfordium has a larger ionic radius (76 pm) than zirconium (71 pm) and hafnium (72 pm), and also because of relativistic stabilisation of the 7s orbital and destabilisation and spin–orbit splitting of the 6d orbitals.[95]

Coprecipitation experiments performed in 2021 studied rutherfordium's behaviour in basic solution containing ammonia or sodium hydroxide, using zirconium, hafnium, and thorium as comparisons. It was found that rutherfordium does not strongly coordinate with ammonia and instead coprecipitates out as a hydroxide, which is probably Rf(OH)4.[96]

Notes

[edit]
  1. ^ In nuclear physics, an element is called heavy if its atomic number is high; lead (element 82) is one example of such a heavy element. The term "superheavy elements" typically refers to elements with atomic number greater than 103 (although there are other definitions, such as atomic number greater than 100[11] or 112;[12] sometimes, the term is presented an equivalent to the term "transactinide", which puts an upper limit before the beginning of the hypothetical superactinide series).[13] Terms "heavy isotopes" (of a given element) and "heavy nuclei" mean what could be understood in the common language—isotopes of high mass (for the given element) and nuclei of high mass, respectively.
  2. ^ In 2009, a team at the JINR led by Oganessian published results of their attempt to create hassium in a symmetric 136Xe + 136Xe reaction. They failed to observe a single atom in such a reaction, putting the upper limit on the cross section, the measure of probability of a nuclear reaction, as 2.5 pb.[14] In comparison, the reaction that resulted in hassium discovery, 208Pb + 58Fe, had a cross section of ~20 pb (more specifically, 19+19
    -11     pb), as estimated by the discoverers.[15]
  3. ^ The amount of energy applied to the beam particle to accelerate it can also influence the value of cross section. For example, in the 28
    14    Si
     + 1
    0    n
     → 28
    13    Al
     + 1
    1    p
     reaction, cross section changes smoothly from 370 mb at 12.3 MeV to 160 mb at 18.3 MeV, with a broad peak at 13.5 MeV with the maximum value of 380 mb.[19]
  4. ^ This figure also marks the generally accepted upper limit for lifetime of a compound nucleus.[24]
  5. ^ This separation is based on that the resulting nuclei move past the target more slowly then the unreacted beam nuclei. The separator contains electric and magnetic fields whose effects on a moving particle cancel out for a specific velocity of a particle.[26] Such separation can also be aided by a time-of-flight measurement and a recoil energy measurement; a combination of the two may allow to estimate the mass of a nucleus.[27]
  6. ^ Not all decay modes are caused by electrostatic repulsion. For example, beta decay is caused by the weak interaction.[34]
  7. ^ It was already known by the 1960s that ground states of nuclei differed in energy and shape as well as that certain magic numbers of nucleons corresponded to greater stability of a nucleus. However, it was assumed that there was no nuclear structure in superheavy nuclei as they were too deformed to form one.[39]
  8. ^ Since mass of a nucleus is not measured directly but is rather calculated from that of another nucleus, such measurement is called indirect. Direct measurements are also possible, but for the most part they have remained unavailable for superheavy nuclei.[44] The first direct measurement of mass of a superheavy nucleus was reported in 2018 at LBNL.[45] Mass was determined from the location of a nucleus after the transfer (the location helps determine its trajectory, which is linked to the mass-to-charge ratio of the nucleus, since the transfer was done in presence of a magnet).[46]
  9. ^ If the decay occurred in a vacuum, then since total momentum of an isolated system before and after the decay must be preserved, the daughter nucleus would also receive a small velocity. The ratio of the two velocities, and accordingly the ratio of the kinetic energies, would thus be inverse to the ratio of the two masses. The decay energy equals the sum of the known kinetic energy of the alpha particle and that of the daughter nucleus (an exact fraction of the former).[35] The calculations hold for an experiment as well, but the difference is that the nucleus does not move after the decay because it is tied to the detector.
  10. ^ Spontaneous fission was discovered by Soviet physicist Georgy Flerov,[47] a leading scientist at JINR, and thus it was a "hobbyhorse" for the facility.[48] In contrast, the LBL scientists believed fission information was not sufficient for a claim of synthesis of an element. They believed spontaneous fission had not been studied enough to use it for identification of a new element, since there was a difficulty of establishing that a compound nucleus had only ejected neutrons and not charged particles like protons or alpha particles.[24] They thus preferred to link new isotopes to the already known ones by successive alpha decays.[47]
  11. ^ For instance, element 102 was mistakenly identified in 1957 at the Nobel Institute of Physics in Stockholm, Stockholm County, Sweden.[49] There were no earlier definitive claims of creation of this element, and the element was assigned a name by its Swedish, American, and British discoverers, nobelium. It was later shown that the identification was incorrect.[50] The following year, RL was unable to reproduce the Swedish results and announced instead their synthesis of the element; that claim was also disproved later.[50] JINR insisted that they were the first to create the element and suggested a name of their own for the new element, joliotium;[51] the Soviet name was also not accepted (JINR later referred to the naming of the element 102 as "hasty").[52] This name was proposed to IUPAC in a written response to their ruling on priority of discovery claims of elements, signed 29 September 1992.[52] The name "nobelium" remained unchanged on account of its widespread usage.[53]
  12. ^ Different sources give different values for half-lives; the most recently published values are listed.

References

[edit]
  1. ^ a b c d e "Rutherfordium". Royal Chemical Society. Retrieved 2019-09-21.
  2. ^ a b c d e f g h i j k Hoffman, Darleane C.; Lee, Diana M.; Pershina, Valeria (2006). "Transactinides and the future elements". In Morss; Edelstein, Norman M.; Fuger, Jean (eds.). The Chemistry of the Actinide and Transactinide Elements (3rd ed.). Dordrecht, The Netherlands: Springer Science+Business Media. ISBN 978-1-4020-3555-5.
  3. ^ a b Gyanchandani, Jyoti; Sikka, S. K. (10 May 2011). "Physical properties of the 6 d -series elements from density functional theory: Close similarity to lighter transition metals". Physical Review B. 83 (17): 172101. Bibcode:2011PhRvB..83q2101G. doi:10.1103/PhysRevB.83.172101.
  4. ^ a b Kratz; Lieser (2013). Nuclear and Radiochemistry: Fundamentals and Applications (3rd ed.). p. 631.
  5. ^ a b Östlin, A.; Vitos, L. (2011). "First-principles calculation of the structural stability of 6d transition metals". Physical Review B. 84 (11): 113104. Bibcode:2011PhRvB..84k3104O. doi:10.1103/PhysRevB.84.113104.
  6. ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
  7. ^ a b Sonzogni, Alejandro. "Interactive Chart of Nuclides". National Nuclear Data Center: Brookhaven National Laboratory. Retrieved 2008-06-06.
  8. ^ a b c Utyonkov, V. K.; Brewer, N. T.; Oganessian, Yu. Ts.; Rykaczewski, K. P.; Abdullin, F. Sh.; Dimitriev, S. N.; Grzywacz, R. K.; Itkis, M. G.; Miernik, K.; Polyakov, A. N.; Roberto, J. B.; Sagaidak, R. N.; Shirokovsky, I. V.; Shumeiko, M. V.; Tsyganov, Yu. S.; Voinov, A. A.; Subbotin, V. G.; Sukhov, A. M.; Karpov, A. V.; Popeko, A. G.; Sabel'nikov, A. V.; Svirikhin, A. I.; Vostokin, G. K.; Hamilton, J. H.; Kovrinzhykh, N. D.; Schlattauer, L.; Stoyer, M. A.; Gan, Z.; Huang, W. X.; Ma, L. (30 January 2018). "Neutron-deficient superheavy nuclei obtained in the 240Pu+48Ca reaction". Physical Review C. 97 (14320): 014320. Bibcode:2018PhRvC..97a4320U. doi:10.1103/PhysRevC.97.014320.
  9. ^ Oganessian, Yu. Ts.; Utyonkov, V. K.; Ibadullayev, D.; et al. (2022). "Investigation of 48Ca-induced reactions with 242Pu and 238U targets at the JINR Superheavy Element Factory". Physical Review C. 106 (24612): 024612. Bibcode:2022PhRvC.106b4612O. doi:10.1103/PhysRevC.106.024612. S2CID 251759318.
  10. ^ "Rutherfordium - Element information, properties and uses | Periodic Table". www.rsc.org. Archived from the original on 2020-05-10. Retrieved 2016-12-09.
  11. ^ Krämer, K. (2016). "Explainer: superheavy elements". Chemistry World. Retrieved 2020-03-15.
  12. ^ "Discovery of Elements 113 and 115". Lawrence Livermore National Laboratory. Archived from the original on 2015-09-11. Retrieved 2020-03-15.
  13. ^ Eliav, E.; Kaldor, U.; Borschevsky, A. (2018). "Electronic Structure of the Transactinide Atoms". In Scott, R. A. (ed.). Encyclopedia of Inorganic and Bioinorganic Chemistry. John Wiley & Sons. pp. 1–16. doi:10.1002/9781119951438.eibc2632. ISBN 978-1-119-95143-8. S2CID 127060181.
  14. ^ Oganessian, Yu. Ts.; Dmitriev, S. N.; Yeremin, A. V.; et al. (2009). "Attempt to produce the isotopes of element 108 in the fusion reaction 136Xe + 136Xe". Physical Review C. 79 (2): 024608. doi:10.1103/PhysRevC.79.024608. ISSN 0556-2813.
  15. ^ Münzenberg, G.; Armbruster, P.; Folger, H.; et al. (1984). "The identification of element 108" (PDF). Zeitschrift für Physik A. 317 (2): 235–236. Bibcode:1984ZPhyA.317..235M. doi:10.1007/BF01421260. S2CID 123288075. Archived from the original (PDF) on 7 June 2015. Retrieved 20 October 2012.
  16. ^ Subramanian, S. (28 August 2019). "Making New Elements Doesn't Pay. Just Ask This Berkeley Scientist". Bloomberg Businessweek. Retrieved 2020-01-18.
  17. ^ a b c d e f Ivanov, D. (2019). "Сверхтяжелые шаги в неизвестное" [Superheavy steps into the unknown]. nplus1.ru (in Russian). Retrieved 2020-02-02.
  18. ^ Hinde, D. (2017). "Something new and superheavy at the periodic table". The Conversation. Retrieved 2020-01-30.
  19. ^ Kern, B. D.; Thompson, W. E.; Ferguson, J. M. (1959). "Cross sections for some (n, p) and (n, α) reactions". Nuclear Physics. 10: 226–234. Bibcode:1959NucPh..10..226K. doi:10.1016/0029-5582(59)90211-1.
  20. ^ Wakhle, A.; Simenel, C.; Hinde, D. J.; et al. (2015). Simenel, C.; Gomes, P. R. S.; Hinde, D. J.; et al. (eds.). "Comparing Experimental and Theoretical Quasifission Mass Angle Distributions". European Physical Journal Web of Conferences. 86: 00061. Bibcode:2015EPJWC..8600061W. doi:10.1051/epjconf/20158600061. hdl:1885/148847. ISSN 2100-014X.
  21. ^ "Nuclear Reactions" (PDF). pp. 7–8. Retrieved 2020-01-27. Published as Loveland, W. D.; Morrissey, D. J.; Seaborg, G. T. (2005). "Nuclear Reactions". Modern Nuclear Chemistry. John Wiley & Sons, Inc. pp. 249–297. doi:10.1002/0471768626.ch10. ISBN 978-0-471-76862-3.
  22. ^ a b Krása, A. (2010). "Neutron Sources for ADS". Faculty of Nuclear Sciences and Physical Engineering. Czech Technical University in Prague: 4–8. S2CID 28796927.
  23. ^ Wapstra, A. H. (1991). "Criteria that must be satisfied for the discovery of a new chemical element to be recognized" (PDF). Pure and Applied Chemistry. 63 (6): 883. doi:10.1351/pac199163060879. ISSN 1365-3075. S2CID 95737691.
  24. ^ a b Hyde, E. K.; Hoffman, D. C.; Keller, O. L. (1987). "A History and Analysis of the Discovery of Elements 104 and 105". Radiochimica Acta. 42 (2): 67–68. doi:10.1524/ract.1987.42.2.57. ISSN 2193-3405. S2CID 99193729.
  25. ^ a b c d Chemistry World (2016). "How to Make Superheavy Elements and Finish the Periodic Table [Video]". Scientific American. Retrieved 2020-01-27.
  26. ^ Hoffman, Ghiorso & Seaborg 2000, p. 334.
  27. ^ Hoffman, Ghiorso & Seaborg 2000, p. 335.
  28. ^ Zagrebaev, Karpov & Greiner 2013, p. 3.
  29. ^ Beiser 2003, p. 432.
  30. ^ a b Pauli, N. (2019). "Alpha decay" (PDF). Introductory Nuclear, Atomic and Molecular Physics (Nuclear Physics Part). Université libre de Bruxelles. Retrieved 2020-02-16.
  31. ^ a b c d e Pauli, N. (2019). "Nuclear fission" (PDF). Introductory Nuclear, Atomic and Molecular Physics (Nuclear Physics Part). Université libre de Bruxelles. Retrieved 2020-02-16.
  32. ^ Staszczak, A.; Baran, A.; Nazarewicz, W. (2013). "Spontaneous fission modes and lifetimes of superheavy elements in the nuclear density functional theory". Physical Review C. 87 (2): 024320–1. arXiv:1208.1215. Bibcode:2013PhRvC..87b4320S. doi:10.1103/physrevc.87.024320. ISSN 0556-2813.
  33. ^ Audi et al. 2017, pp. 030001-129–030001-138.
  34. ^ Beiser 2003, p. 439.
  35. ^ a b Beiser 2003, p. 433.
  36. ^ Audi et al. 2017, p. 030001-125.
  37. ^ Aksenov, N. V.; Steinegger, P.; Abdullin, F. Sh.; et al. (2017). "On the volatility of nihonium (Nh, Z = 113)". The European Physical Journal A. 53 (7): 158. Bibcode:2017EPJA...53..158A. doi:10.1140/epja/i2017-12348-8. ISSN 1434-6001. S2CID 125849923.
  38. ^ Beiser 2003, p. 432–433.
  39. ^ a b c Oganessian, Yu. (2012). "Nuclei in the "Island of Stability" of Superheavy Elements". Journal of Physics: Conference Series. 337 (1): 012005-1–012005-6. Bibcode:2012JPhCS.337a2005O. doi:10.1088/1742-6596/337/1/012005. ISSN 1742-6596.
  40. ^ Moller, P.; Nix, J. R. (1994). Fission properties of the heaviest elements (PDF). Dai 2 Kai Hadoron Tataikei no Simulation Symposium, Tokai-mura, Ibaraki, Japan. University of North Texas. Retrieved 2020-02-16.
  41. ^ a b Oganessian, Yu. Ts. (2004). "Superheavy elements". Physics World. 17 (7): 25–29. doi:10.1088/2058-7058/17/7/31. Retrieved 2020-02-16.
  42. ^ Schädel, M. (2015). "Chemistry of the superheavy elements". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 373 (2037): 20140191. Bibcode:2015RSPTA.37340191S. doi:10.1098/rsta.2014.0191. ISSN 1364-503X. PMID 25666065.
  43. ^ Hulet, E. K. (1989). Biomodal spontaneous fission. 50th Anniversary of Nuclear Fission, Leningrad, USSR. Bibcode:1989nufi.rept...16H.
  44. ^ Oganessian, Yu. Ts.; Rykaczewski, K. P. (2015). "A beachhead on the island of stability". Physics Today. 68 (8): 32–38. Bibcode:2015PhT....68h..32O. doi:10.1063/PT.3.2880. ISSN 0031-9228. OSTI 1337838. S2CID 119531411.
  45. ^ Grant, A. (2018). "Weighing the heaviest elements". Physics Today. doi:10.1063/PT.6.1.20181113a. S2CID 239775403.
  46. ^ Howes, L. (2019). "Exploring the superheavy elements at the end of the periodic table". Chemical & Engineering News. Retrieved 2020-01-27.
  47. ^ a b Robinson, A. E. (2019). "The Transfermium Wars: Scientific Brawling and Name-Calling during the Cold War". Distillations. Retrieved 2020-02-22.
  48. ^ "Популярная библиотека химических элементов. Сиборгий (экавольфрам)" [Popular library of chemical elements. Seaborgium (eka-tungsten)]. n-t.ru (in Russian). Retrieved 2020-01-07. Reprinted from "Экавольфрам" [Eka-tungsten]. Популярная библиотека химических элементов. Серебро – Нильсборий и далее [Popular library of chemical elements. Silver through nielsbohrium and beyond] (in Russian). Nauka. 1977.
  49. ^ "Nobelium - Element information, properties and uses | Periodic Table". Royal Society of Chemistry. Retrieved 2020-03-01.
  50. ^ a b Kragh 2018, pp. 38–39.
  51. ^ Kragh 2018, p. 40.
  52. ^ a b Ghiorso, A.; Seaborg, G. T.; Oganessian, Yu. Ts.; et al. (1993). "Responses on the report 'Discovery of the Transfermium elements' followed by reply to the responses by Transfermium Working Group" (PDF). Pure and Applied Chemistry. 65 (8): 1815–1824. doi:10.1351/pac199365081815. S2CID 95069384. Archived (PDF) from the original on 25 November 2013. Retrieved 7 September 2016.
  53. ^ Commission on Nomenclature of Inorganic Chemistry (1997). "Names and symbols of transfermium elements (IUPAC Recommendations 1997)" (PDF). Pure and Applied Chemistry. 69 (12): 2471–2474. doi:10.1351/pac199769122471.
  54. ^ a b c d e Barber, R. C.; Greenwood, N. N.; Hrynkiewicz, A. Z.; Jeannin, Y. P.; Lefort, M.; Sakai, M.; Ulehla, I.; Wapstra, A. P.; Wilkinson, D. H. (1993). "Discovery of the transfermium elements. Part II: Introduction to discovery profiles. Part III: Discovery profiles of the transfermium elements". Pure and Applied Chemistry. 65 (8): 1757–1814. doi:10.1351/pac199365081757. S2CID 195819585.
  55. ^ a b c d Ghiorso, A.; Nurmia, M.; Harris, J.; Eskola, K.; Eskola, P. (1969). "Positive Identification of Two Alpha-Particle-Emitting Isotopes of Element 104" (PDF). Physical Review Letters. 22 (24): 1317–1320. Bibcode:1969PhRvL..22.1317G. doi:10.1103/PhysRevLett.22.1317. Archived (PDF) from the original on 2018-07-22. Retrieved 2019-04-05.
  56. ^ a b c Ghiorso, A.; Seaborg, G. T.; Organessian, Yu. Ts.; Zvara, I.; Armbruster, P.; Hessberger, F. P.; Hofmann, S.; Leino, M.; Munzenberg, G.; Reisdorf, W.; Schmidt, K.-H. (1993). "Responses on 'Discovery of the transfermium elements' by Lawrence Berkeley Laboratory, California; Joint Institute for Nuclear Research, Dubna; and Gesellschaft fur Schwerionenforschung, Darmstadt followed by reply to responses by the Transfermium Working Group". Pure and Applied Chemistry. 65 (8): 1815–1824. doi:10.1351/pac199365081815.
  57. ^ Bemis, C. E.; Silva, R.; Hensley, D.; Keller, O.; Tarrant, J.; Hunt, L.; Dittner, P.; Hahn, R.; Goodman, C. (1973). "X-Ray Identification of Element 104". Physical Review Letters. 31 (10): 647–650. Bibcode:1973PhRvL..31..647B. doi:10.1103/PhysRevLett.31.647.
  58. ^ "Rutherfordium". Rsc.org. Archived from the original on 2011-04-08. Retrieved 2010-09-04.
  59. ^ Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
  60. ^ "Names and symbols of transfermium elements (IUPAC Recommendations 1994)" (PDF). Pure and Applied Chemistry. 66 (12): 2419–2421. 1994. doi:10.1351/pac199466122419. Archived (PDF) from the original on September 22, 2017. Retrieved September 7, 2016.
  61. ^ Yarris, L. (1994). "Naming of element 106 disputed by international committee". Archived from the original on July 1, 2016. Retrieved September 7, 2016.
  62. ^ "Names and symbols of transfermium elements (IUPAC Recommendations 1997)". Pure and Applied Chemistry. 69 (12): 2471–2474. 1997. doi:10.1351/pac199769122471.
  63. ^ a b c d Heßberger, F. P.; Hofmann, S.; Ninov, V.; Armbruster, P.; Folger, H.; Münzenberg, G.; Schött, H. J.; Popeko, A. K.; et al. (1997). "Spontaneous fission and alpha-decay properties of neutron deficient isotopes 257−253104 and 258106". Zeitschrift für Physik A. 359 (4): 415. Bibcode:1997ZPhyA.359..415A. doi:10.1007/s002180050422. S2CID 121551261.
  64. ^ a b Heßberger, F. P.; Hofmann, S.; Ackermann, D.; Ninov, V.; Leino, M.; Münzenberg, G.; Saro, S.; Lavrentev, A.; et al. (2001). "Decay properties of neutron-deficient isotopes 256,257Db, 255Rf, 252,253Lr". European Physical Journal A. 12 (1): 57–67. Bibcode:2001EPJA...12...57H. doi:10.1007/s100500170039. S2CID 117896888.
  65. ^ a b Heßberger, F. P.; Antalic, S.; Ackermann, D.; Andel, B.; Block, M.; Kalaninova, Z.; Kindler, B.; Kojouharov, I.; Laatiaoui, M.; Lommel, B.; Mistry, A. K.; Piot, J.; Vostinar, M. (2016). "Investigation of electron capture decay of 258Db and α decay of 258Rf". The European Physical Journal A. 52 (11). doi:10.1140/epja/i2016-16328-2. ISSN 1434-6001.
  66. ^ Dressler, R. & Türler, A. Evidence for isomeric states in 261Rf (PDF) (Report). PSI Annual Report 2001. Archived from the original (PDF) on 2011-07-07. Retrieved 2008-01-29.
  67. ^ Ghiorso, A.; Nurmia, M.; Eskola, K.; Eskola P. (1970). "261Rf; new isotope of element 104". Physics Letters B. 32 (2): 95–98. Bibcode:1970PhLB...32...95G. doi:10.1016/0370-2693(70)90595-2.
  68. ^ Lane, M. R.; Gregorich, K.; Lee, D.; Mohar, M.; Hsu, M.; Kacher, C.; Kadkhodayan, B.; Neu, M.; et al. (1996). "Spontaneous fission properties of 104262Rf". Physical Review C. 53 (6): 2893–2899. Bibcode:1996PhRvC..53.2893L. doi:10.1103/PhysRevC.53.2893. PMID 9971276.
  69. ^ Somerville, L. P.; Nurmia, M. J.; Nitschke, J. M.; Ghiorso, A.; Hulet, E. K.; Lougheed, R. W. (1985-05-01). "Spontaneous fission of rutherfordium isotopes". Physical Review C. 31 (5): 1801–1815. Bibcode:1985PhRvC..31.1801S. doi:10.1103/PhysRevC.31.1801. ISSN 0556-2813. PMID 9952719.
  70. ^ a b c Kratz, J. V.; Nähler, A.; Rieth, U.; Kronenberg, A.; Kuczewski, B.; Strub, E.; Brüchle, W.; Schädel, M.; et al. (2003). "An EC-branch in the decay of 27-s263Db: Evidence for the new isotope263Rf" (PDF). Radiochim. Acta. 91 (1–2003): 59–62. doi:10.1524/ract.91.1.59.19010. S2CID 96560109. Archived from the original (PDF) on 2009-02-25.
  71. ^ Dvorak, J.; Brüchle, W.; Chelnokov, M.; Düllmann, Ch. E.; Dvorakova, Z.; Eberhardt, K.; Jäger, E.; Krücken, R.; Kuznetsov, A.; Nagame, Y.; Nebel, F.; Nishio, K.; Perego, R.; Qin, Z.; Schädel, M.; Schausten, B.; Schimpf, E.; Schuber, R.; Semchenkov, A.; Thörle, P.; Türler, A.; Wegrzecki, M.; Wierczinski, B.; Yakushev, A.; Yeremin, A. (2008-04-03). "Observation of the 3 n Evaporation Channel in the Complete Hot-Fusion Reaction 26Mg + 248Cm Leading to the New Superheavy Nuclide 271Hs". Physical Review Letters. 100 (13): 132503. doi:10.1103/PhysRevLett.100.132503. ISSN 0031-9007. PMID 18517941.
  72. ^ a b Ellison, P.; Gregorich, K.; Berryman, J.; Bleuel, D.; Clark, R.; Dragojević, I.; Dvorak, J.; Fallon, P.; Fineman-Sotomayor, C.; et al. (2010). "New Superheavy Element Isotopes: 242Pu(48Ca,5n)285114". Physical Review Letters. 105 (18): 182701. Bibcode:2010PhRvL.105r2701E. doi:10.1103/PhysRevLett.105.182701. PMID 21231101. Archived from the original on 2019-07-02. Retrieved 2019-07-14.
  73. ^ a b c Fritz Peter Heßberger. "Exploration of Nuclear Structure and Decay of Heaviest Elements at GSI - SHIP". agenda.infn.it. Archived from the original on 2016-09-18. Retrieved 2016-09-10.
  74. ^ Oganessian, Yu. Ts.; et al. (2007). "Synthesis of the isotope 282113 in the Np237+Ca48 fusion reaction". Physical Review C. 76 (1): 011601. Bibcode:2007PhRvC..76a1601O. doi:10.1103/PhysRevC.76.011601.
  75. ^ a b Oganessian, Yuri (8 February 2012). "Nuclei in the "Island of Stability" of Superheavy Elements". Journal of Physics: Conference Series. 337 (1). IOP Publishing: 012005. Bibcode:2012JPhCS.337a2005O. doi:10.1088/1742-6596/337/1/012005. ISSN 1742-6596.
  76. ^ a b Oganessian, Yu. Ts.; Utyonkov, V. K.; Ibadullayev, D.; et al. (2022). "Investigation of 48Ca-induced reactions with 242Pu and 238U targets at the JINR Superheavy Element Factory". Physical Review C. 106 (24612): 024612. Bibcode:2022PhRvC.106b4612O. doi:10.1103/PhysRevC.106.024612. OSTI 1883808. S2CID 251759318.
  77. ^ Hofmann, S. (2009). "Superheavy Elements". The Euroschool Lectures on Physics with Exotic Beams, Vol. III Lecture Notes in Physics. Vol. 764. Springer. pp. 203–252. doi:10.1007/978-3-540-85839-3_6. ISBN 978-3-540-85838-6.
  78. ^ Dmitriev, S N; Eichler, R; Bruchertseifer, H; Itkis, M G; Utyonkov, V K; Aggeler, H W; Lobanov, Yu V; Sokol, E A; Oganessian, Yu T; Wild, J F; Aksenov, N V; Vostokin, G K; Shishkin, S V; Tsyganov, Yu S; Stoyer, M A; Kenneally, J M; Shaughnessy, D A; Schumann, D; Eremin, A V; Hussonnois, M; Wilk, P A; Chepigin, V I (15 October 2004). "Chemical Identification of Dubnium as a Decay Product of Element 115 Produced in the Reaction 48Ca+243Am". CERN Document Server. Archived from the original on 25 March 2019. Retrieved 5 April 2019.
  79. ^ a b Stock, Reinhard (13 September 2013). Encyclopedia of Nuclear Physics and its Applications. John Wiley & Sons. p. 305. ISBN 978-3-527-64926-6. OCLC 867630862.
  80. ^ "Six New Isotopes of the Superheavy Elements Discovered". Berkeley Lab News Center. 26 October 2010. Retrieved 5 April 2019.
  81. ^ Ninov, Viktor; et al. (1999). "Observation of Superheavy Nuclei Produced in the Reaction of 86
    Kr
     with 208
    Pb
    "    . Physical Review Letters. 83 (6): 1104–1107. Bibcode:1999PhRvL..83.1104N. doi:10.1103/PhysRevLett.83.1104. Archived from the original on 2023-07-18. Retrieved 2018-11-04.
  82. ^ "Results of Element 118 Experiment Retracted". Berkeley Lab Research News. 21 July 2001. Archived from the original on 29 January 2008. Retrieved 5 April 2019.
  83. ^ Subramanian, S. "Making New Elements Doesn't Pay. Just Ask This Berkeley Scientist". Bloomberg Businessweek. Archived from the original on 2020-11-14. Retrieved 2020-01-18.
  84. ^ a b c d e f g h i j k Kratz, J. V. (2003). "Critical evaluation of the chemical properties of the transactinide elements (IUPAC Technical Report)" (PDF). Pure and Applied Chemistry. 75 (1): 103. doi:10.1351/pac200375010103. S2CID 5172663. Archived from the original (PDF) on 2011-07-26.
  85. ^ Fricke, Burkhard (1975). "Superheavy elements: a prediction of their chemical and physical properties". Recent Impact of Physics on Inorganic Chemistry. Structure and Bonding. 21: 89–144. doi:10.1007/BFb0116498. ISBN 978-3-540-07109-9. Retrieved 4 October 2013.
  86. ^ Eliav, E.; Kaldor, U.; Ishikawa, Y. (1995). "Ground State Electron Configuration of Rutherfordium: Role of Dynamic Correlation". Physical Review Letters. 74 (7): 1079–1082. Bibcode:1995PhRvL..74.1079E. doi:10.1103/PhysRevLett.74.1079. PMID 10058929.
  87. ^ Mosyagin, N. S.; Tupitsyn, I. I.; Titov, A. V. (2010). "Precision Calculation of the Low-Lying Excited States of the Rf Atom". Radiochemistry. 52 (4): 394–398. Bibcode:2010Radch..52..394M. doi:10.1134/S1066362210040120. S2CID 120721050.
  88. ^ Dzuba, V. A.; Safronova, M. S.; Safronova, U. I. (2014). "Atomic properties of superheavy elements No, Lr, and Rf". Physical Review A. 90 (1): 012504. arXiv:1406.0262. Bibcode:2014PhRvA..90a2504D. doi:10.1103/PhysRevA.90.012504. S2CID 74871880.
  89. ^ Gyanchandani, Jyoti; Sikka, S. K. (2011). "Structural Properties of Group IV B Element Rutherfordium by First Principles Theory". arXiv:1106.3146 [cond-mat.mtrl-sci].
  90. ^ Moody, Ken (2013-11-30). "Synthesis of Superheavy Elements". In Schädel, Matthias; Shaughnessy, Dawn (eds.). The Chemistry of Superheavy Elements (2nd ed.). Springer Science & Business Media. pp. 24–8. ISBN 978-3-642-37466-1.
  91. ^ Oganessian, Yury Ts; Dmitriev, Sergey N. (2009). "Superheavy elements in D I Mendeleev's Periodic Table". Russian Chemical Reviews. 78 (12): 1077. Bibcode:2009RuCRv..78.1077O. doi:10.1070/RC2009v078n12ABEH004096. S2CID 250848732.
  92. ^ Türler, A.; Buklanov, G. V.; Eichler, B.; Gäggeler, H. W.; Grantz, M.; Hübener, S.; Jost, D. T.; Lebedev, V. Ya.; et al. (1998). "Evidence for relativistic effects in the chemistry of element 104". Journal of Alloys and Compounds. 271–273: 287. doi:10.1016/S0925-8388(98)00072-3.
  93. ^ Gäggeler, Heinz W. (2007-11-05). "Lecture Course Texas A&M: Gas Phase Chemistry of Superheavy Elements" (PDF). Archived from the original (PDF) on 2012-02-20. Retrieved 2010-03-30.
  94. ^ Nagame, Y.; et al. (2005). "Chemical studies on rutherfordium (Rf) at JAERI" (PDF). Radiochimica Acta. 93 (9–10_2005): 519. doi:10.1524/ract.2005.93.9-10.519. S2CID 96299943. Archived from the original (PDF) on 2008-05-28.
  95. ^ Li, Z. J.; Toyoshima, A.; Asai, M.; et al. (2012). "Sulfate complexation of element 104, Rf, in H2SO4/HNO3 mixed solution". Radiochimica Acta. 100 (3): 157–164. doi:10.1524/ract.2012.1898. S2CID 100852185.
  96. ^ Kasamatsu, Yoshitaka; Toyomura, Keigo; Haba, Hiromitsu; et al. (2021). "Co-precipitation behaviour of single atoms of rutherfordium in basic solutions". Nature Chemistry. 13 (3): 226–230. Bibcode:2021NatCh..13..226K. doi:10.1038/s41557-020-00634-6. PMID 33589784. S2CID 231931604.

Bibliography

[edit]
[edit]

Retrieved from "https://en.wikipedia.org/w/index.php?title=Rutherfordium&oldid=1253459222"